Detailed Product Description

9-Function Beauty Compact Unit  equipment S-908

The facial steamer is used to clean the skin thoroughly by opening the pores in order to remove impurities (like blackheads, whiteheads, make up, etc.) and generally revitalize the skin.  The addition of ozone enriched steam helps to promote a more sterile environment for further treatment of the skin.

High frequency provides germicidal, decongesting effect and can produce ozone that helps to cure wound easily without leaving any pitted scar.  It provides accurate intensity adjustment; and handle with spiral cable for better mobility.  This machine comes with both ultra violet and infrared electrodes in order to suit any skin types.

Vacuum suction treatments are for reshaping the body and removing blackheads and impurities from skin.  The suction cup/tube is attached to the unit and the pressure controls allow the esthetician to vary the strength of the suction action.  The movement is rhythmic stroke toward lymph nodes.

Usually this procedure is used on the face, thighs, hips, arms and abdomen areas.  The movement hastens removal of waste products and inverse pressure causes subcutaneous tissue to lift or arch to fill the cavity of the cup attachment creating an erythematic and stimulating effect on the tissue.

Galvanic is for deep cleaning.  Introduction of active substance by means of galvanic current which helps to permeate the layers of skin much more intensively and deeply than with manual application.

Lifting uses positive and negative electrical current to improve blood circulations, skin elasticity in order to tighten skin texture and distance between skin cells.  Visible dramatic result is revealed.

Rotary brush is able to massage the skin while it deep cleanses skin surface.  It can be used on different face and body parts, especially on rough skin.  Deep cleanses impurities away from skin surface and pores.  Performs rhythmic and vibrating massage in order to relief stressed and tired skin. It also helps to accelerate and improve blood circulations and metabolism.  Client will feel refreshed and relax; and it leaves skin soft and smooth.

Magnifying lamp provides cool lighting, which would not sting eyes to make them tired.  It is suitable to be used for special esthetical treatments for precisions.

Wood lamp is to help identify clearly the qualities, problems and the unusual conditions of the skin; in order to provide proper treatments.

Special of this system:

Each function in this multi-function beauty system has its own power control.  Even if one function is down, other functions can still be workable.

Specification:

Main Power                                            H/F Power Switch

Rotary Brush Power switch                  Vac/Spray Power Switch

Gal/ Lifting Power Switch                     H/F Intensity Switch

Rotary Brush Intensity Switch        Vac/Spray Intensity Switch

Gal/Lifting Intensity Switch                    Pos/Neg Switch        

Gal/Lifting Intensity Indicator

Facial Steamer Operations:

1.Adjust the height of steamer. Be careful of bumping.

1.Fill the glass jar with distill water only through water funnel , do not exceed the red warning line.  Make sure the jar is attached firmly and perfectly to the steamer.

2.Connect power plug.  Adjust timer .

3.Turn power on, power switch should light up.  Steam will come out in around 10-15 minutes after the power is switched on.

4Turn ozone on only when steam comes out.  Ozone switch should light up.  Do not turn ozone on when there is no steam.

5.Position steam jet to aim at clients chin and steam should travel over his/her entire face.

6.Use arm adjuster knob to secure arm angle.

7.When time is up, turn ozone off first, then power .

8.Unplug power socket and wait till the glass is cool before removing it from the machine.

9.If it is needed to stop steaming during operation, turn power and ozone switches off.  The timer will still go on until it reaches OFF position.

10. For safety purpose, the machine will automatically shut off when water level is below the heating element.

High Frequency Operations:

1.Sterilize accessories before and after each usage.

2.Switch Main Power on.

3.Switch power on.

4. Adjust intensity according to clients skin type.

5. Turn intensity to minimum (click sound) when finish using or exchanging electrodes. (When exchange glass electrodes, please be careful that the glue on the electrode is hot. Please twist slowly when pulling out the electrode in order to keep the glue in place.  If pull the electrode out, please be gentle in case the glass will break.)

10.This procedure can be performed on both shoulders and body.

11.Turn off machine with one hand.