Detailed Product Description

5-Function beauty unit S-928

The facial steamer is used to clean the skin thoroughly by opening the pores in order to remove impurities (like blackheads, whiteheads, make up, etc.) and generally revitalize the skin.  The addition of ozone enriched steam helps to promote a more sterile environment for further treatment of the skin.

 Rotary Brush

Rotary brush is able to massage the skin while it deep cleanses skin surface.  It can be used on different face and body parts, especially on rough skin.  Deep cleanses impurities away from skin surface and pores.  Performs rhythmic and vibrating massage in order to relief stressed and tired skin. It also helps to accelerate and improve blood circulations and metabolism.  Client will feel refreshed and relax; and it leaves skin soft and smooth.

 Vacuum & Spray

Vacuum suction treatments are for reshaping the body and removing blackheads and impurities from skin.  The suction cup/tube is attached to the unit and the pressure controls allow the esthetician to vary the strength of the suction action.  The movement is rhythmic stroke toward lymph nodes.

Usually this procedure is used on the face, thighs, hips, arms and abdomen areas.  The movement hastens removal of waste products and inverse pressure causes subcutaneous tissue to lift or arch to fill the cavity of the cup attachment creating an erythematic and stimulating effect on the tissue.

 High Frequency

High frequency provides germicidal, decongesting effect and can produce ozone that helps to cure wound easily without leaving any pitted scar.  It provides accurate intensity adjustment; and handle with spiral cable for better mobility.  This machine comes with both ultra violet and infrared electrodes in order to suit any skin types.

Facial Steamer Operations:

1.Fill the glass jar with distill water only through water funnel , do not exceed the red warning line.  Make sure the jar is attached firmly and perfectly to the steamer.

2.Adjust timer and star to work.  Steam will come out in around 10-15 minutes after the power is switched on.

3.Switch ozone on only when steam comes out.  should light up.  Do not turn ozone on when there is no steam.

4.Position steam jet to aim at clients chin and steam should travel over his/her entire face.

5.Use arm adjuster knob to tune arm angle.

6.When time is up, turn ozone off first.

7.Unplug power socket and wait till the glass is cool before removing it from the machine.

8.For safety purpose, the machine will automatically shut off when water level is below the heating element.

Cleaning instructions for facial steamer:

1.Glass jar and heat element should be cleaned at least once a week with distill water.

2.Clean residues from heating element by using clean distill water and soft clothe.  Do not use any metal or abrasives.

3.Do not lose the rubber band on top of the glass jar.  It is used to prevent water-spilling out.

1.Connect the desire brush to the brush holder and connect to brush connector plug .

2.Turn on Brush Power on to begin. should light up.

3.Adjust the power of the brush by turning the intensity switch .

4.Apply cleansing milk on skin.

5.Push the direction control button upward to make the brush turn counter-clockwise or push it downward to make the brush turn clockwise.

6.Use brush to cleanse/massage face for 3-5 minutes.

7.Rinse clean with lukewarm water.

8.Pat dry and continue with other steps of treatment.

9.Turn intensity to minimum (click sound) when finish using or exchanging brushes.

High Frequency Operations:

1.Sterilize accessories before and after each usage.

2.Switch power on. should light up.

3.Adjust intensity according to clients skin type. If client feels too hot, reduce power.

4.Turn intensity to minimum (click sound) when finish using or exchanging electrodes. (When exchange glass electrodes, please be careful that the glue on the electrode is hot. Please screw slowly when pulling out the electrode in order to keep the glue in place.  If pull the electrode out, please be gentle in case the glass will break.)

Stimulation of Surface Tissue Sparking Method of High Frequency

1. Use the mushroom glass rod.

2. Penetrates to subcutaneous tissue (adipose face).

3. Generates heat that increases flow of blood tissue fluids.

4. Improves nutrition and elimination of skin.

5. Improves skin texture, oil and moisture balance to skin.

6.Operator sets up the same as in Direct Method procedure but electrode is lifted slightly away from the skin to create a sparking effect between the electrode and the clients skin.

Vacuum/Spray Operations:

1.When plug in the pipes for vacuum/spray functions.  Please insert the pipes in to the correct plugs according to the pictures indicated.

2.Switch Vacuum/Spray Power on. should light up.

3.Vacuum: when vacuuming impurities, insert a tiny piece of cotton in order to block any impurities getting into the machine.  Also, do not use any toning lotion with powder inside.

4.Use index or middle finger to cover the small hole on the vacuum glass tube in order to provide suction function.  Test power on the back of the hand before performing on client.  Higher power on oily and normal skins; lower power on dry, sensitive and mature skin.

5.Spray: use thumb to cover the small hole on the top of the spray bottle (VS6) in order to let toning lotion spray out.  Remember to spray from top to bottom in case lotion gets into nose.

6.Turn intensity to minimum (click sound) when finish using or exchanging glass tubes.